# Remesh

Remeshing is an automatic process that replaces the polygons of a 3D model with a new mesh that follows the same surface. The new mesh is usually more even and built to a target face count or face shape, such as all quads or all triangles. It is used to clean up scans, sculpts, and AI-generated models.

_Modeling · updated 2026-11-16_

---

## What is Remeshing?

**Remeshing** rebuilds the surface of a 3D model with new polygons. Instead of editing the existing [mesh](/glossary/mesh), the algorithm samples the shape and generates a fresh layout, usually to a requested face count or face shape. The silhouette stays close to the original, and the [topology](/glossary/topology) underneath changes completely.

Remeshing is common after steps that produce messy geometry: 3D scans, [photogrammetry](/glossary/photogrammetry), digital sculpting, boolean operations, and AI generation. Those meshes are often dense, uneven, or made of long thin triangles that are hard to texture, rig, or render efficiently.

## Common Types of Remeshing

| Method | How it works | Good for |
|--------|--------------|----------|
| Voxel remesh | Converts the model to voxels and back to a surface | Closing holes, merging parts, sculpt bases, print preparation |
| Quad remesh | Builds an even all-quad mesh that follows the curvature | Animation-friendly bases, subdivision, editing in DCC tools |
| Triangle remesh | Builds evenly sized triangles at a target count | Real-time assets, simulation, consistent shading |

## Remesh vs Decimate vs Retopology

- **Decimation** removes faces from the existing mesh. It is fast and keeps UVs, which suits static props and print files.
- **Remeshing** creates a new mesh automatically. It gives even faces and a chosen face type, but the UVs and textures usually need to be rebuilt or baked again.
- **[Retopology](/glossary/retopology)** is the broader job of producing a clean, efficient mesh with intentional edge flow. It can be manual or start from a quad remesh.

## Remeshing in Sloyd

In Sloyd, you set the budget at generation time rather than remeshing afterwards. [Text to 3D](/text-to-3d) and [Image to 3D](/image-to-3d) take a target face count and a topology of auto, quads, or triangles, and Sloyd builds the output to that target. That is why a Sloyd model can go into an engine or a slicer without a separate cleanup pass. If you need a lighter version of a model you already have, the Decimate tab in **Mesh Modifiers** reduces its triangle count in the browser with a live preview. Our guide to [Mesh Modifiers](/blog/mesh-modifiers-decimate-and-wack-ai-3d-models) covers polycount targets by platform and when a desktop remesher is the better tool.

## FAQ

### What does remeshing do?

Remeshing throws away the existing polygon layout and builds a new one over the same surface. The result has more even faces, a predictable face count, and often a single face type. The shape stays close to the original, but fine detail can soften if the target face count is low.

### What is the difference between remeshing and decimation?

Decimation removes edges and vertices from the existing mesh until it reaches a lower triangle count, and it usually keeps the UVs. Remeshing builds a completely new mesh, so it can also change the face shape and evenness, but the UVs and textures usually need to be rebuilt or baked again.

### Is remeshing the same as retopology?

They overlap. Retopology is the goal: a clean, efficient mesh with good edge flow. Remeshing is an automatic way to get there. Quad remeshers produce a usable base quickly, while manual retopology gives the most control over edge loops around joints and faces.

### What is voxel remeshing?

Voxel remeshing converts the model to a grid of small cubes and back to a surface. It closes holes and merges overlapping parts into one solid mesh, which is useful for sculpting and for 3D printing. The voxel size controls how much detail survives.

### Do I need to remesh AI-generated models?

Often not. Sloyd lets you choose the face count and the topology (auto, quads, or triangles) before you generate, so the model arrives at the budget you need. To lower the triangle count of an existing model afterwards, use the Decimate tool in Sloyd Mesh Modifiers.

## Related terms

- https://www.sloyd.ai/glossary/retopology
- https://www.sloyd.ai/glossary/topology
- https://www.sloyd.ai/glossary/quad-topology
- https://www.sloyd.ai/glossary/polygon-count

---

Source: https://www.sloyd.ai/glossary/remesh
