# Print-Ready Model

A print-ready model is a 3D model that is prepared to print successfully as is. It is a watertight, manifold mesh with walls and details thick enough for the printer, it is at the correct real-world scale, it sits stably on the build plate with manageable overhangs, and it is exported in a format the slicer reads, such as STL or 3MF.

_Modeling · updated 2026-11-16_

---

## What is a Print-Ready Model?

A **print-ready model** is a 3D file you can slice and print without fixing it first. Many 3D models are made for screens: they can have open surfaces, paper-thin parts, floating pieces, or no defined size. Those details do not matter in a render, but they cause failed or fragile prints. Making a model print-ready means fixing those issues before the slicer sees it.

## The Print-Ready Checklist

| Check | Why it matters |
|-------|----------------|
| [Watertight mesh](/glossary/watertight-mesh) | The slicer must know inside from outside to fill the layers |
| Minimum wall thickness | Thin walls do not print or break easily |
| Minimum detail size | Details smaller than the nozzle or resin resolution disappear |
| Correct scale and units | The part prints at the intended size; [3MF](/glossary/3mf) stores the units |
| Stable base | A flat bottom improves bed adhesion and keeps the part upright |
| Overhangs and supports | Steep overhangs (often beyond about 45°) need supports or a different orientation |
| Single solid or intended parts | Floating pieces fall off; multi-part prints need tolerances |
| Slicer format | Export as [STL](/glossary/stl), 3MF, or OBJ |

## Common Fixes

- **Holes or non-manifold edges**: use the repair in your slicer, or a voxel [remesh](/glossary/remesh).
- **Thin parts**: scale the model up, or thicken those parts.
- **Unstable base**: cut the bottom flat or add a base.
- **Large models**: split them into parts that fit the build volume.

## Print-Ready Models in Sloyd

Sloyd generates closed meshes intended for printing and exports them in a print list of 3MF, STL, OBJ, PLY, and BLEND. You can send a model straight to Bambu Studio or OrcaSlicer, where you set the scale, supports, and orientation. To make a model stand on its own, the [Add Base for 3D Printing](/apps/add-base-for-3d-printing) app adds a display base, and Split to Parts divides large models into pieces. For a full walkthrough from prompt or photo to print, see the [3D printing use case page](/use-case/3d-printing). Selling 3D prints commercially needs a separate custom license on every plan.

## FAQ

### What does print-ready mean?

Print-ready means a 3D model can go into a slicer and print successfully without repairs. The mesh is closed, details and walls are thick enough, the scale is correct, the model has a stable base, and it is saved in a format such as STL or 3MF.

### What is the minimum wall thickness for 3D printing?

It depends on the printer and material. For FDM with a 0.4 mm nozzle, aim for at least about 0.8 to 1.2 mm, which is two to three line widths. Resin printers can handle thinner walls, often around 0.5 mm or more, but very thin parts can break when you remove supports.

### How do I check if my model is print-ready?

Import it into your slicer and look for warnings about non-manifold edges, check the dimensions, and use the layer preview to find thin walls, floating parts, and overhangs without support. Blender's 3D Print Toolbox also checks thickness and manifold errors.

### Do AI-generated models need preparation before printing?

Some. Sloyd generates closed meshes intended for printing, but you still choose the size, the orientation, and whether supports or a base are needed. Thin parts such as swords, antennas, or fingers may need to be scaled up or thickened.

### Which file format should I use for a print-ready model?

3MF is the most complete, because it stores units, colors, and multiple parts. STL is the most universally accepted. Both work in Bambu Studio, OrcaSlicer, PrusaSlicer, and Cura.

## Related terms

- https://www.sloyd.ai/glossary/3d-printing
- https://www.sloyd.ai/glossary/watertight-mesh
- https://www.sloyd.ai/glossary/3mf
- https://www.sloyd.ai/glossary/stl

---

Source: https://www.sloyd.ai/glossary/print-ready
